When comparing a shredded vs solid memory foam pillow, start with what the zipper opens. It may let you remove the outer cover for washing. If you want to adjust loose fill, look for instructions showing how to open the chamber that holds it. A pillow with a shaped main component can also have a removable pad or insert, so check which piece the manufacturer says you can change.
Table of Contents
Which zipper opens, and what can you adjust?
On the listing for your exact model, look for a photo or instruction that shows what comes out. “Zippered” alone leaves that question open.
| Pillow | What you can access | What the manufacturer says you can adjust |
|---|---|---|
| Brooklyn Bedding Premium Shredded Foam Pillow | A removable outer cover and an inner chamber holding a loose blend of foams and down alternative. Product page | Remove some fill and save it so you can add it back later. Manufacturer FAQ |
| Elviros S1 | The outer cover unzips for removal and washing. Elviros’s S1 replacement cover gallery shows a formed main component beneath the cover. | The S1 whole-pillow listing documents cover removal and gives no instructions for adjusting loose fill. |
| Elviros C1 | The C1 whole-pillow listing and manufacturer FAQ describe a shaped main component and removable pieces. | The same FAQ explains how to rotate the pillow and describes adjustments using the removable pieces. |
If you’re trying to work out which piece a care label applies to, see Rune & Horn’s guide to memory foam pillows with washable covers.

How to inspect a shredded vs solid memory foam pillow
- Read the care tag and match the pillow to its exact model, size, and variant. Use the packaging or order details if the tag gives only care instructions.
- Inspect the removable outer casing. Follow the maker’s cover-removal directions and look for a second closure or a separate piece beneath the cover. A gallery photo can show a formed component beneath the casing. Use the whole-pillow listing or ask the maker to confirm what shipped with your exact option. Elviros S1 replacement cover gallery · Elviros S1 whole-pillow listing
- Check whether the maker identifies a loose-fill compartment or a separate removable pad. Look for directions that name the opening and explain which material or piece you can remove and put back.
- Before unzipping an unclear section, send the maker your exact model and variant and a photo of the closure. Ask, “What does this zipper open, where are the original adjustment directions for my option, and can I get the relevant part separately?”
Hypothetical loose-fill case. You find Brooklyn Bedding’s directions for removing and saving some of the original fill. Those directions tell you how to adjust your pillow. For replacement supply, the same FAQ says Brooklyn Bedding cannot send extra fill. Brooklyn Bedding FAQ
Hypothetical removable-pad case. You find Elviros C1 directions for adjusting the pillow with its removable pieces, then need to replace a missing piece. Ask Elviros whether it supplies that specific piece separately for your variant. Elviros C1 product page and FAQ
Which parts can you replace?



Use the names in the manufacturer’s instructions to identify the piece you need. Then check the FAQ or accessory listing for your model, size, and variant.
- Brooklyn Bedding Premium Shredded Foam Pillow. Save any fill you remove if you might want to add it back. Brooklyn Bedding says it cannot send extra fill. Manufacturer FAQ
- Elviros S1. Elviros sells the S1 replacement cover separately and has a separate S1 booster pad listing. Ask Elviros to confirm whether the booster fits your exact option before ordering.
If the listing leaves a detail unclear, send the manufacturer a question with the exact option you’re considering.
I’m looking at [exact listing URL] and selected [model, size, and variant]. Which zipper opens the outer cover? Which opening, if any, gives me access to fill I can adjust or a pad or insert I can remove? Can I order [part name] separately for this exact option? If so, could you send me the part link?
Which pillow should you shortlist?
- You want to change the loose fill by the handful. Shortlist the Brooklyn Bedding Premium Shredded Foam Pillow if you’re happy working with the fill it comes with. Manufacturer FAQ
- You want a shaped main component with a removable outer cover. Shortlist the Elviros S1. If you already own one and only need a cover, check the separate S1 replacement cover listing for your size first.
Hypothetical scenario. Say you only want a lower pillow. With Brooklyn Bedding’s shredded foam pillow, you can take out a little loose fill at a time and save it to add back later. The FAQ lists both height and firmness as reasons to adjust the fill. With the Elviros C1, you can keep the same edge facing you and take out the base to make that edge lower. Brooklyn Bedding FAQ · Elviros C1 product page
Set up a comparable first check on your own bed
Start with each pillow as delivered. Use the same mattress, usual sleeping position, and the same pillowcase if it fits both without squeezing either pillow. Check each pillow after its maker’s stated expansion window, then write down what you would change before making an adjustment.
| Model | When to plan the first check | What to record before changing anything |
|---|---|---|
| Brooklyn Bedding Shredded Foam Pillow | Allow up to 24 hours after unpacking for full expansion, as the pillow FAQ advises. | Note how it feels with the fill as delivered. If you remove fill, record how much and keep it in a separate labeled bag, as the FAQ advises retaining removed fill. |
| Elviros S1 | Plan the first check at 72 hours after unpacking, the upper end of the S1 page’s 48–72 hour expansion guidance. | Note where your head rests relative to the contoured center and which edge faced you when you set up the pillow. Keep the same setup when you repeat your first check. |
The expansion guidance tells you when to start comparing; comfort is what you’re checking. Photograph the starting setup, keep any parts you remove separately, and confirm what the seller allows before making a change you might need to undo. A short record is enough: Unpacked: ___ | First check: ___ | Starting setup: ___ | One change: ___ | Better, worse, or no difference: ___.
Work backward from your confirmed return cutoff. Check whether it applies to requesting authorization, dropping off the parcel, or having it arrive.
Hypothetical: Say you have six full days from unboxing to an already-confirmed carrier drop-off deadline. The Elviros S1 maker’s guidance allows 72 hours (three days) for expansion. Brooklyn’s stated allowance is up to 24 hours. This example illustrates timing only and does not describe either seller’s return policy. Allow three days for expansion, two nights to compare setups, and one day to pack and drop off the parcel. That uses all six days, with no buffer for a label delay. You can plan a shorter trial after expansion if the seller’s condition rules allow it, or keep shopping. Elviros S1 maker’s guidance
Confirm the return terms before you pay
For the Brooklyn Bedding Shredded Foam Pillow, the general sleep accessory return policy gives 30 days from delivery, asks you to supply packaging and contact support for a prepaid label, and excludes clearance items. Confirm that the policy applies to your listing and destination, and ask whether removing and retaining fill as described in the pillow FAQ is allowed during a returnable trial.
For the Elviros S1, the product page says 100 days after delivery and asks for the original state, bills, tags, original packaging, and no visible tears or signs of use. The general refund policy uses purchase or order placement as the starting point and refers to delivery in another clause. It also requires prior authorization, addresses missing parts and original condition, and says the customer pays return shipping. Those pages give different starting points, so get the applicable cutoff and permitted trial condition in writing.
Before ordering, estimate what you could lose on each listing if you return it, and add the two amounts if you might buy both and keep neither. Include only original shipping the seller confirms is nonrefundable and return shipping the seller confirms you’ll pay. Check whether the return label is deducted from your refund or paid separately so you count it once. For a hypothetical listing, $8 in nonrefundable original shipping plus a $12 label deducted from the refund leaves you out $20. These figures are illustrative. Choose that listing only if you’d be comfortable losing $20 if you return it.
For this exact listing and delivery address, what is the return cutoff date once delivery is known, and what must happen by then? What would the return label cost me? Can I return the pillow after trying it on my bed and making this maker-documented adjustment: [name the adjustment]?
Save the reply and keep the packaging, tags, receipt, and any removed parts. Restoring the starting setup does not establish return eligibility. If the seller won’t confirm the cutoff, cost, or permitted condition, treat the order as a purchase you may have to keep. If a reversible trial matters, choose a listing with terms you can verify before paying.
We sell Elviros products. If you’re buying a new pillow, want a shaped foam core, and have independently reviewed the exact listing and confirmed your size, consider the complete S1. Elviros S1 Cervical Neck Pillow for Sleeping
Leave a Reply