If you’re comparing Elviros C1 vs C2, both pillows list the same nominal footprint and edge heights, with or without the base pad. The two checks before you buy are to match the full SKU to your chosen model and color, then confirm what comes in the box. The listings do not establish which cover fabric ships with each exact SKU.
We sell Elviros products.
Table of Contents
Do the C1 and C2 have the same dimensions?
The manufacturer’s FAQs give both pillows a nominal footprint of 23.6 × 16.3 inches and list the same edge heights for each base pad configuration. Elviros C1 FAQ · Elviros C2 FAQ
| Base pad | High edge | Low edge |
|---|---|---|
| Removed | 3.3 inches | 2.4 inches |
| Installed | 4.1 inches | 3.2 inches |
The FAQs don’t specify the measurement method or whether any weight was applied. These figures leave open how tall each pillow sits under pressure, how the cutouts compare, and how either pillow will fit you.
Which whole-pillow SKU matches your model and color?
Both models come in Dark Grey and White. Each row identifies a specific whole-pillow variant.
| Model | Color | Exact whole-pillow SKU |
|---|---|---|
| C1 | Dark Grey | DLZ10104DGWH004 |
| C1 | White | DLZ10104WHDG004 |
| C2 | Dark Grey | DLZ10102DGWH004 |
| C2 | White | DLZ10102WHDG004 |
What if the cart hides the SKU?
Record the visible product name, model and color, and copy the public URL from the official product page after selecting the variant. A Shopify variant ID is the number after ?variant= in the URL. The SKU is a separate product code. Neither tells you what was packed in the box.
In a hypothetical purchase of C1 White, your record would show variant ID 51046253101375 and SKU DLZ10104WHDG004. Keep that mapping with the original Elviros C1 White product link.
Suppose you switch from C1 Dark Grey to C2 Dark Grey while comparing them. The color stays the same, but the C2 Dark Grey selection should map to variant ID 51046291964223 and SKU DLZ10102DGWH004. If the cart still says C1, correct the selection before paying. If the cart leaves the model or SKU unclear, send the seller the public product link and the visible cart name, model and color. Ask them to confirm the model, color and SKU for that cart line in writing. If the link drops the variant parameter, they can still use the visible details to check. Share the public link and product details only. Keep payment information private.
Suppose the seller has confirmed in writing that C1 White DLZ10104WHDG004 includes the cover you need, but White becomes unavailable or you decide to switch to C1 Dark Grey DLZ10104DGWH004. The color and SKU change, and reopening the same product title doesn’t carry over the earlier confirmation. Before paying, ask the supplier whether the same written answer applies to the Dark Grey SKU. If the answer is unclear and the cover is essential, buy only a SKU the supplier has confirmed in writing includes it.


Elviros C1 vs C2: What do the listings establish about the included cover?


Look for wording tied to the whole-pillow SKU you selected. An included cover should be identified as part of that selection. An optional cover may appear as an add-on or a separate product. A replacement cover listing can tell you what the spare is made of. The included cover fabric and complete box contents remain unverified for each exact whole-pillow SKU above.
Two hypothetical buying examples show how to use the listings:
- C1 White buyer looking for polyester. The C1 FAQ describes polyester and 3D mesh. If you already own either model and need a spare, Elviros lists the C1 replacement cover as 100% polyester and compatible with both models. If you’re buying the C1 White whole pillow, ask what the sewn-in label says on the cover supplied with
DLZ10104WHDG004. - C2 Dark Grey buyer looking for nylon and spandex. The C2 whole-pillow FAQ describes polyester and 3D mesh, while a gallery image lists 85% nylon and 15% spandex. If you already own a C2 and need a spare, the C2 replacement cover lists nylon and spandex without percentages. Its compatibility with the C1 remains unverified. If you’re buying the C2 Dark Grey whole pillow, ask what the sewn-in label says on the cover supplied with
DLZ10102DGWH004.
What if the removable pieces decide which pillow you buy?
The official C1 and C2 FAQs each describe a removable 0.79-inch bottom piece for adjusting height and identify blue as the softer insert and yellow as the firmer insert. Use those descriptions to identify which piece does what. Check the box contents separately for your exact SKU. Similar-looking pieces can differ in shape or dimensions. Official Elviros C1 FAQ · Official Elviros C2 FAQ
- Hypothetical first purchase for a lower setup. If the listing is unclear, ask for written, itemized confirmation for the model, color and SKU. Ask the seller to identify the bottom piece, confirm that removing it is how to set up that pillow lower, and list which colored inserts are in the box. Compare the replies against your requirements before paying.
- Hypothetical replacement for a pillow you own. If you only need the blue insert, use your original order or label to identify the model, color and SKU. Give the seller those details and a photo of the piece if you have one. Ask them to identify the matching insert for your pillow and confirm whether the offer is for that piece alone or a whole pillow. If the offer is for a whole pillow, check whether it includes the specific insert before paying for a duplicate. Confirm the match against your own model and SKU before buying a piece pictured with the other model.
Elviros C1 vs C2: Replacement parts for direct-store orders
If you buy from the Elviros website and later need a replacement insert or another part, contact Elviros as your original seller and reference your direct-store order number. The published Free Inserts page asks for an Amazon order number and a description of the adjustment needed. It says the offer is limited to one time per order and shipping time varies by region. Ask Elviros how it handles your direct-store order and whether that order qualifies for the Free Inserts program. Elviros Free Inserts
You could send: “I ordered the Elviros C2 from your website under order [number]. I’m looking for [exact part] because [reason]. Can you confirm which version of the part fits my pillow? If it’s available separately, can you quote the part alone? Does my direct-store order qualify for the Free Inserts program?”
If a piece listed as included in your order is missing when the pillow arrives, report it as a delivery issue and name the missing piece. If everything arrived and you want an extra piece or a replacement for one you later lose, ask whether that specific part is available separately. If being able to replace that exact piece would determine whether you buy the pillow, hold off until Elviros confirms it fits your chosen model and can be obtained separately.
What should you check before you buy?
- Match the cart to the SKU table. Check that the model and color match the same row, along with the full whole-pillow SKU if displayed. Save a screenshot so you can refer to your selection after delivery.
- Confirm what comes in the box. Give the seller your exact SKU. Ask whether the cover shown is included or sold separately, what fiber content is printed on the sewn-in label of the supplied cover, and which other parts ship with that SKU. Save the seller’s written reply.
If the seller confirms that the cover and box contents meet your needs for your chosen C1 SKU, shop the Elviros C1 whole pillow.
If you’re still considering the C2, use the Rune & Horn C2 buying checklist to review that option before ordering.
How do you report a mismatch after your pillow arrives?
Compare the model, color, and SKU in your saved cart selection and order confirmation with the packing slip. Check the sewn-in cover label against any written confirmation from the seller. If the carton has an outside SKU label, photograph it and record that SKU separately from the order SKU.
If anything differs, reply in the original order or support thread before washing the cover or discarding the packaging. Include the order number, quote each relevant identifier as printed, and explain the discrepancy. In a hypothetical example, if the seller confirmed nylon and spandex for your order but the sewn-in label says polyester, quote both and attach a photo of the label. Keep your cart screenshot, order confirmation, packing slip, seller correspondence, and photos of the pillow, cover label, and carton label. Ask the seller to verify what shipped and tell you the next step for your order.
Leave a Reply