Start with the pillow you already use. To see whether it works as a pillow for back and side sleepers, check how it feels in both positions and whether you can leave it in place through one normal turn while you’re awake.
Table of Contents
Three awake checks on one mattress
Use your usual pillow on your own mattress. Start on your back and roll once onto your usual side at your normal pace. Begin with the fill, orientation, and removable pieces as you ordinarily use them. If you want to adjust something during the trial, record what you wanted to do and what you actually did.
- Back. Note how the setup feels as you settle and whether you want to move your head or the pillow.
- Side. Note how the setup feels when you first land and whether you want to shift your head, pull the pillow, or prop it up.
- Turn. Record natural turn if your head lands where you want it as part of the roll and the pillow stays put. Record head shift if you deliberately lift or slide your head to another spot. Record moved pillow by hand if you push, pull, lift, or rotate the pillow to settle. Record both actions if you do both.
Your head can travel across the pillow as part of a natural roll. Use head shift when you deliberately move your head to another spot to settle, even if the pillow stays put.

These checks show what you do to settle during one awake turn. How the setup behaves over a full night remains untested, including whether its fill shifts over time.
Copyable A/B record
Use your current setup for Trial A. If you need Trial B, use the same mattress and change one thing before lying down. For example, if your pillow has adjustable fill, add or remove some for Trial B and use that amount for all three checks. Coop describes this adjustment for its Crescent pillow. Coop Crescent manufacturer reference
| What to record | Trial A | Trial B, if needed |
|---|---|---|
| Setup before lying down | Usual setup ___ | One change ___ |
| On your back | How it felt and any adjustment wanted or made ___ | ___ |
| On your side | How it felt on landing and any adjustment wanted or made ___ | ___ |
| Through the turn | Natural turn, head shift, or moved pillow by hand ___ | ___ |
| Decision | ___ | ___ |
Read each trial on its own. If both positions feel acceptable and you settle naturally with the pillow in place, keep that setup. If it takes a deliberate head shift, decide whether you’re willing to make that move while leaving the pillow in place. If you move the pillow by hand to settle, record that the setup required repositioning.
Two hypothetical decisions
- Hypothetical 1. A shopper feels comfortable on their back and side and settles naturally after rolling onto their side. They keep their current pillow.
- Hypothetical 2. On the same mattress, a shopper prefers less fill on their back and more fill on their side. Each fill level feels acceptable in only one position. They want one setup that stays in place through the turn, so they pass on that option and compare another design.
How to shortlist a pillow for back and side sleepers after the awake checks
If your current setup requires an adjustment you’d rather avoid during the turn, use the adjustment you recorded to narrow your shortlist.
| What you wanted to change | What to check in the listing |
|---|---|
| The amount of fill | The Coop Crescent lets you add or remove fill before lying down. Shortlist it if you want to try one fill amount for both positions. If each position needs a different amount in your awake comparison, pass on that setup. Coop Crescent manufacturer reference |
| Where your head rests | The Pillow Bar Hybrid guide directs you to rest your head in the center on your back and deliberately move it toward a curved end on your side. Consider that layout if you’re willing to make the head shift while leaving the pillow in place. The Pillow Bar Hybrid manufacturer guide |
| The height or edge facing you | The Elviros C1 lets you choose which edge faces you and whether to install the removable base before lying down. Try one edge and base setting through the whole turn. If you’d need to rotate the pillow or change the base after rolling, pass on that setup. Elviros C1 manufacturer specifications |
When comparing listed heights, record the measurement point, which pieces are installed, and whether the figure is unloaded loft or height under a stated load. Check which removable pieces come with the exact option you’re considering. Leave unclear details blank. Rune & Horn loft guide
How to read the turn instructions before you buy
If you can’t try a candidate pillow for back and side sleepers, do one awake turn on your own mattress with your current pillow. Note which moves you make and which you’d be willing to repeat. Then read the candidate’s instructions in order, from getting the pillow ready to settling on your side. The instructions can tell you what moves they call for; how the pillow feels still takes a trial.
Mark each action by when it happens. A step you finish before getting into bed belongs to setup. Once you start the roll, distinguish where your head lands naturally from a deliberate head shift or a move you make with your hands. For example, The Pillow Bar Hybrid guide directs you to move your head toward a curved end for side sleeping. That’s a head shift in the awake record.
If the manual skips the transition, ask the seller for a walkthrough:
What do I do before getting into bed, where do I start on my back, and after one roll to my side, what, if anything, do I deliberately move with my head or hands?
Hypothetical: A seller replies, “Use the same setup for both positions.” That still leaves the head movement unclear. You can set the candidate aside without paying, keep using your current pillow, or repeat the awake turn with one setup change your current pillow already allows.
Comparing the Elviros C1 settings

The manufacturer lists the C1’s higher and lower edges at 3.3 and 2.4 in without the base and 4.1 and 3.2 in with it. The removable base is 0.79 in thick. The height under your head remains unknown from those figures. Elviros C1 manufacturer specifications

Choose whether to install the base, then rotate the pillow 180° before lying down if you want the other edge facing you. Keep the base and facing edge fixed through each trial. The full-pillow FAQ describes the blue firmness insert as “softer” and the yellow insert as “firmer.” The Elviros C1 listing describes the firmness inserts separately from the 0.79-inch base piece. Elviros C1 full-pillow FAQ

We sell Elviros products.
View the Elviros C1 full-pillow listing
Leave a Reply